Yes, it would. Best way to paint ... really only way I know to paint ... is to thin down some clear silicone caulk with solvent, add your paint/dye to the slurry and then brush/paint the thinned down colored caulk onto your bait. When solvent flashes off and the moisture cures the caulk, you will be left with your painted High Strength 3 silicone swimbait.
It is possible for us to make a clear catalyst for the High Strength 3 so the cured High Strength 3 would be white rather than pink. The downside is, it is difficult to tell when you have the catalyst fully mixed in as there is no color change when you add the clear catalyst so you need to make sure to mix extremely well. If you want to make the High Strength even softer ... simply add 10% silicone oil (found on our website
https://www.makelure.com/store/p/961-Si ... l-1lb.aspx ), and this will lower the hardness from 10A to approximately 7-8A.
Mike