Page 1 of 1

making ur resin bait slow sink

PostPosted: Sat Feb 14, 2015 2:12 pm
by eatsleepswimbait
I cant seem to get it right and would like to ask the experts. As with the inclusion of mucro ballons what is best amount to start with. With limited resources, i would like to not have too many errors. Since it is 50/50 would it be better to start at half of the 100% amt of ballons or 75% of the 100% as there would need to have alot of weight if ballons are at 100% of the 50/50 ratio. Thanks in advance very much appreciated

Re: making ur resin bait slow sink

PostPosted: Mon Feb 16, 2015 9:49 am
by Mike - Alumilite
Without hardware ... wire, hooks, split rings, etc ... here is a rule of thumb:

0% Microballoons ... slow to medium sink rate
30-35% Microballoons ... neutrally buoyant ... suspending
50% microballoons ... floats
100% microballoons ... floats but also jumps to the top much more rapidly

Design of lure shape will also have some effect but this should give you some starting points.

Mike

Re: making ur resin bait slow sink

PostPosted: Tue Feb 17, 2015 8:52 am
by eatsleepswimbait
Thank you greatly, this helps alot