The Hunt For Big Fish with Larry Dahlberg

Currently I am coating my lures with flex coat 2 part epoxy. One of the lures I've recently coated has a few bumps in the epoxy, some type of debris got on the lure while the epoxy was still curing, or debris on epoxy brush. I need to know if there is a way to sand these bumps Down smooth with a fine grit and still have the crystal clear "look" once I'm done, I don't want to scuff the final finish of this lure.

No problem. Use a fine emery board and get it smooth, then apply a super thin coat and it will be perfect!
best
L