Flex coat epoxy Q

Questions about Making Your Own Lures

Flex coat epoxy Q

Postby Theanglersarsenal » Fri Jan 16, 2015 6:11 am

Currently I am coating my lures with flex coat 2 part epoxy. One of the lures I've recently coated has a few bumps in the epoxy, some type of debris got on the lure while the epoxy was still curing, or debris on epoxy brush. I need to know if there is a way to sand these bumps Down smooth with a fine grit and still have the crystal clear "look" once I'm done, I don't want to scuff the final finish of this lure.
Theanglersarsenal
 
Posts: 2
Joined: Fri Jan 16, 2015 5:59 am

Re: Flex coat epoxy Q

Postby dahlberg » Sat Jan 17, 2015 9:31 am

No problem. Use a fine emery board and get it smooth, then apply a super thin coat and it will be perfect!
best
L
Larry Dahlberg
The Hunt For Big Fish
User avatar
dahlberg
Site Admin
 
Posts: 5279
Joined: Wed Oct 11, 2006 7:49 pm
Location: Taylors Falls, Minnesota


Return to Lure Making

Who is online

Users browsing this forum: No registered users and 36 guests

cron