Probably been asked before but since I am new here thought I'd ask.
What works for everyone as a clear final coat on crank baits.
Been making lures left and right and having a blast with my son. Painting every color combination under the sun but the final coat has not met with the results I want.
Clear coat?
5 posts
• Page 1 of 1
Clear coat?
by King Eider » Sun Jul 15, 2012 3:10 pm
- King Eider
- Posts: 5
- Joined: Mon Jul 02, 2012 8:05 am
Re: Clear coat?
by Watchhiller » Sun Jul 15, 2012 4:25 pm
................................
Last edited by Watchhiller on Thu Jul 18, 2013 2:47 pm, edited 1 time in total.
- Watchhiller
- Posts: 115
- Joined: Wed Jul 13, 2011 10:07 am
Re: Clear coat?
by aka anglinarcher » Mon Jul 16, 2012 3:00 pm
Alumilite Amazing Clear Cast
Devcon 2-Ton Epoxy
EnviroTec Lite
These are the ones I have used before, and they work well. All will yellow after time, but you really can't tell it on most colors.
Devcon 2-Ton Epoxy
EnviroTec Lite
These are the ones I have used before, and they work well. All will yellow after time, but you really can't tell it on most colors.
I think my bucket list has a hole in the bottom!
-
aka anglinarcher - Posts: 853
- Joined: Mon Jan 10, 2011 3:51 pm
- Location: Northern Utah
Re: Clear coat?
by King Eider » Tue Jul 17, 2012 4:11 pm
With these products do I need to rotate the lures as they dry like on a rotisserie?
- King Eider
- Posts: 5
- Joined: Mon Jul 02, 2012 8:05 am
Re: Clear coat?
by aka anglinarcher » Tue Jul 17, 2012 9:28 pm
Yes
I think my bucket list has a hole in the bottom!
-
aka anglinarcher - Posts: 853
- Joined: Mon Jan 10, 2011 3:51 pm
- Location: Northern Utah
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 88 guests