Page 1 of 1
made a plaster mold have a ?
Posted:
Thu Mar 15, 2012 7:51 pm
by shenlonco
Hi i made a plaster mold I know you have to seal it because its pourous anyone know whats best to seal a plaster mold?
THANKS
Shen
Re: made a plaster mold have a ?
Posted:
Thu Mar 15, 2012 8:26 pm
by dahlberg
Try thinning out elmer's glue and doing a light coat on it. As with anything, try it first on the backside or place that won't mess up the mold.
best
L
Re: made a plaster mold have a ?
Posted:
Thu Mar 15, 2012 8:33 pm
by shenlonco
Thanks for the tip!
A guy told me you can use the devcon 2 tn epoxy and brush it on.... i will have to see going to the store in the morning to look at some stuff that i can use.
THANKS
Shen
Re: made a plaster mold have a ?
Posted:
Thu Mar 15, 2012 10:18 pm
by aka anglinarcher
The Devcon 2 Ton will need to be thinned with alcohol before that would work. Try the Emers glue first.
Re: made a plaster mold have a ?
Posted:
Fri Mar 16, 2012 6:47 am
by shenlonco
anyone use the gorilla glue that looks like it may work?
Re: made a plaster mold have a ?
Posted:
Fri Mar 16, 2012 8:30 am
by Watchhiller
........................
Re: made a plaster mold have a ?
Posted:
Fri Mar 16, 2012 9:26 pm
by Seachaser
Gorilla glue will also turn white.