Page 1 of 1
Drag way to tight on New Shimano 400TE
Posted:
Sat Apr 24, 2010 6:51 pm
by oldshoe
Need some help. I just took a Shimano 400TE out of the box and put new line on it. The star drag is at it's lowest setting and yet when I pull out line if feels like it's set at 30lbs. Any thoughts?
Re: Drag way to tight on New Shimano 400TE
Posted:
Sun Apr 25, 2010 7:21 am
by Justin C
was the drag "locked down" when you took it out of the box? A new reel comes with the drag completely backed off - and is basically in free spool. Could be that you bought a "demo" - TE's have smooth drags (when working) - I would return it for another
edit * when you say you took it "of the box" - I assumed you meant it was a brand new reel - is that the case? If not don't store reels with the drag locked down - if it is new - someone opened the box and locked the drag down IMO.
Re: Drag way to tight on New Shimano 400TE
Posted:
Sun Apr 25, 2010 9:25 am
by oldshoe
Yes it was new out of the box. However after repeated loosening and applying slight drag pressure it seems to be functiong OK.
Thank you for your reply.