Page 1 of 1

Not curing

PostPosted: Wed Mar 18, 2015 7:44 pm
by Danny Menton
Hi, I ordered a gallon of alumisol to continue pouring baits. I'm not sure this is the correct product as it will not cure or harden like the product in the soft plastic kit. Am I using the right stuff, did i get wrong product, thanks for any help, dan

Re: Not curing

PostPosted: Thu Mar 19, 2015 8:11 am
by dahlberg
If it says Alumisol on the bottle and it looks like milk it should be the right stuff. Does it turn clear when you heat it? The only thing I would suggest at this point, if the stuff is clarifying, is that you cook it just a bit longer. Take some of the material that didn't cure and re-cook it, then let us know the result!
We've switched to a non phthalate version which is better from a strength standpoint plus has safer chemistry, is more resistant to scorching but it takes a little more cooking.
best
L

Re: Not curing

PostPosted: Thu Mar 19, 2015 11:58 am
by Mike - Alumilite
Make sure you shake the gallon extremely well before heating as it will separate.

Mike

Re: Not curing

PostPosted: Fri Mar 20, 2015 5:19 am
by Danny Menton
Thank you gentlemen, I didn't shake it well. Ty hat did the trick and I was able to reuse it.